Life Fitness 8225 - Manual (Page 10)

STEP 11:
FIGURE 11
• Place TOWER BRACE (4) over the GUIDE RODS (15) as shown and SECURELY assemble TOWER
BRACE (4) to the TOWER (3) using two 1/2 X 4” BOLTS (18), two 1/2” WASHERS (24), and two 1/2”
LOCK NUTS (26) as shown in FIGURE 11.
10
0 1 2 3 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2
• LOOSELY assemble two 2 X 7-1/4” PLATES (8) to
two 4-1/2” PULLEYS (13) using two 3/8 X 2-1/4”
BOLTS (21), four 3/8” WASHERS (25), and two 3/8”
LOCK NUTS (27). See FIGURE 12.
STEP 12:
27
3/8 X 2-1/4” 21
FIGURE 12
13
8
25
18 1/2 X 4”
3
24
26
4
31
• Slide the 13/16” SHAFT COLLARS (31) to the top of the GUIDE RODS (15) and SECURELY tighten the
SHAFT COLLAR (31) set screws. See FIGURE 11.
15