Life Fitness Fit-1 - Manual (Page 20)

FIGURE 29
20
STEP 29:
• SECURELY assemble two 4-1/2” PULLEYS (38) to the BOOM (8) using two BLACK RH CAPS (77), two RH CAPS (78), two
3/8 X 2-3/4” BOLTS (68), four 3/8” SAE WASHERS (75), four 3/8” RH WASHERS (76), four 3/8 X 1/2” FLANGE SPACERS
(54), two 2-7/8 X 2-1/4” CABLE CLIPS (49) and two 3/8” LOW HEIGHT LOCK NUTS (73) as shown in FIGURE 29.
75
73
77 BLACK
68 3/8 X 2-3/4” (70m)
29
33
44
49
54
76
• Slide one WEIGHT STACK PIN (33) over the STEM on the HEAD PLATE (29) as shown in FIGURE 29.
• Screw the threaded end of the LAT CABLE (44) all the way onto the end of the STEM on the HEAD PLATE (29) and tighten jam
nut securely. See FIGURE 29.
8
38
78
0
1 1/2 1/2 1/2 1/2 1/2 1/2 2 3 4 5 6
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150