LG XBR342 - Manual (Page 42)

Recording from an External Input
42
Recording from External Components
You can record from an external component, such as a
camcorder or VCR, connected to any of the VCR/DVD
Recorder’s external inputs.
11
Make sure that the component you want to
record from is connected properly to the
VCR/DVD Recorder. See page 17.
22
Press INPUT repeatedly to select the external
input to record from.
• AV1: Audio/Video Input mounted on back panel
• AV2 (AV2 COMP): Audio/Video Input mounted on front
panel
• DV: DV Input mounted on front panel
ote
Check that the Audio In settings DV Rec Audio are as
you want them. See page 24.
33
Load a recordable disc or tape.
44
Set a recording mode as necessary by pressing
REC MODE repeatedly.
DVD: SP (Standard Quality), LP (Low Quality),
XP(High Quality)
VCR: SP (Standard Play), SLP (Super Long Play)
55
Press REC (z) once.
Recording will start. (The REC indicator lights in the
display window.)
Recording continues until you press STOP ( x ) or the
disc is full.
To record for a fixed length of time, see Instant Timer
Recording on page 39.
66
Press STOP (x) to stop recording.
ote
If your source is copy-protected using CopyGuard, you will not
be able to record it using this recorder. See Copyright on page
8 for more details.
Recording from a Digital Camcorder
You can record from a digital camcorder connected to
the DV IN jack on the front panel of this VCR/DVD
Recorder. You can use the VCR/DVD Recorder’s
remote to control both the camcorder and the VCR/DVD
Recorder. Before recording, make sure that the audio
input for the DV IN jack is set up (see page 24).
ips
• The source signal must be DVC-SD format.
• Some camcorders cannot be controlled using the
VCR/DVD Recorder remote.
• If you connect a second DVD recorder using a DV
cable, you cannot control the second recorder from
this one.
• You cannot control the VCR/DVD Recorder remotely
from a component connected to the DV IN jack.
• You cannot record date and time information from a
DV cassette.
11
Make sure your digital camcorder is connected
to the front panel DV IN jack. See page 17.
22
Check that the DV audio input is as you require.
You can choose between Audio 1 (original audio) and
Audio 2 (overdubbed audio).
• DV Input is set from the DV Rec Audio in sub-menu of
the General menu. See DV Rec Audio on page 24 for
more information.
33
Press INPUT repeatedly to select the DV input.
DV appears in the display window.
44
Find the place on the camcorder tape from
which you want to start recording.
For best results, pause playback at the point from which
you want to record.
• Depending on your camcorder, you can use this
VCR/DVD Recorder’s remote control to control the
camcorder using the STOP, PLAY and PAUSE func-
tions.
55
Press REC (z) once to start recording.
• Recording is automatically stopped if the recorder
detects no signal.
• You can pause or stop the recording by pressing
PAUSE/STEP or STOP. You cannot control the cam-
corder from this remote control during recording.
• In Video mode, the final frame of the recording may
remain displayed on screen for a while after recording
stops.
Playing Recordings on Other DVD
Players
Most regular DVD players can play finalized discs
recorded in Video mode. A small number of players
can also play DVD-RW discs recorded in VR mode,
finalized or not. Check the manual that came with the
other player to check what kinds of discs it will play.
Finalizing a Disc
Finalizing ‘fixes’ the recordings in place so that the
disc can be played on a regular DVD player or com-
puter equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen
for navigating the disc. This is accessed by pressing
DISC MENU or TITLE. To finalize a disc, refer to
“DISC Finalize” on page 25.