LG XBR342 - Manual (Page 24)

DV Record Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
jack.
Some digital camcorders have two stereo tracks for
audio. One is recorded at the time of shooting; the other
is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is used.
Auto Chapter
During recording (Video mode only), chapter markers
are added automatically at fixed intervals. You can set
this interval to 3 minutes, 5 minutes or 10 minutes. To
turn off automatic chapter marking, select “Not Use”.
DISC
DISC Initialize
• If you load a blank DVD-R disc, it will always be ini-
tialized in Video mode, which allows the disc to be
played in most standard DVD players.
• If you load a blank DVD-RW disc, you will be prompt-
ed to initialize the disc in Video mode (for maximum
compatibility) or VR mode (to enable advanced edit-
ing features).
• If you load a DVD-RW that has already been used,
you can change between Video mode and VR mode
by erasing the disc using the DISC Initialize feature.
11
Press SETUP.
The Setup menu appears.
22
Use v / V to select the DISC option.
33
While the DISC option is selected, press B to
move to the second level.
44
Use v / V to select the DISC Initialize option.
55
Press B to move to the third level.
Start icon is highlighted.
66
Press ENTER.
Disc Initialize menu appears.
77
Use b / B to select a desired DISC Initialize
Mode (VR Mode or Video Mode) then press
ENTER.
88
Use b / B to select OK, and press ENTER.
It takes a few moments to initialize the disc.
99
Press ENTER.
Caution
If you want to change the disc format, everything
recorded on the disc will be erased.
24
Before Operation (Continued)
Audio 2
Audio 1
DISC Record Mode
VCR Record Mode
DV Record Audio
Auto Chapter
Prev. Select
5 Min
10 Min
Not Use
3 Min
DISC Record Mode
VCR Record Mode
DV Record Audio
Auto Chapter
Prev. Select
Start DISC Initialize
DISC Finalize
DISC Name
DISC Protect
PBC
Prev. Select
Video Mode
Select mode.
Disc Initialize
VR Mode