LG HB8004R - Manual (Page 11)

Service Manual 11
Installation
4. SECURE THE GUIDE PANELS
Extend the guide panels (TYPE F) to fill the window
opening using 4 screws (TYPE B) to secure them, as
shown in Figure. 11.
5. INSTALL THE SASH SEAL AND SASH LOCK
a. Cut the sash seal (TYPE E) to the window width. Stuff
the sash seal between the glass and the window to
prevent air and insects from getting into the room, as
shown in Figure. 11.
b. Fasten the
L
bracket using a (TYPE A) screw, as
shown in Figure. 11.
6. Window installation of room air conditioner is now
completed. See ELECTRICAL DATA for attaching
power cord to electrical outlet.
REMOVAL FROM WINDOW
Trun the air conditioner off, disconnect the
power cord, remove the L bracket and the
screws installed through the top and bottom
of the guide panels, and save for reinstalla-
tion later. Close the guide panels. keeping a
firm grip on the air conditioner, raise the
sash, and carefully tilt the air conditioner
backward, draining any condensate water.
Lift the air conditioner from the window ad
remove the sash seal from between the win-
dows.
NOTICE
Figure 11
Type B
Sash Seal
(Type F)
L Bracket
Type A