Linksys PLEBR10 - Manual (Page 9)

EtherFast ® 10/100 Bridge and USB Adapter
2. When you see Figure 6-2, click the Next button to continue.
3. Enter your User Name and Company Name. Select Anyone who uses this
computer (all users) to install a shortcut to the Security Configuration
Utility on every user’s desktop (This selection is not available for Windows
98 and ME users). Then click the Next button to continue.
11
Instant PowerLine TM Series
Chapter 6: Using the Setup
Utility CD-ROM
To begin installation of the EtherFast 10/100 Bridge or USB Adapter, you will
use the Setup Utility CD-ROM to run the InstallShield Wizard. When
installing the USB Adapter, you must run the Setup Utility CD-ROM on the PC
that will be connected to the Adapter.
1. Insert the Setup Utility CD-ROM into the computer’s CD-ROM drive. The
Setup Utility CD-ROM should run automatically. If it does not, click the
Start button and choose Run. In the box that appears, enter D:\setup.exe
(if “D” is the letter of your CD-ROM drive).
10
Figure 6-2
Figure 6-3
Figure 6-1
Overview
Running the InstallShield Wizard