Linksys PLEBR10 - Manual (Page 11)

EtherFast ® 10/100 Bridge and USB Adapter
8. Click the Finish button to exit the InstallShield Wizard.
9. You will be asked to restart your computer. Click the Yes button to restart
now, or click the No button to restart later.
The installation of the EtherFast 10/100 Bridge is complete.
Proceed to Chapter 10: Using the Instant PowerLine Security
Configuration Utility.
15
Instant PowerLine TM Series
6. You will see Figure 6-8. Proceed to Chapter 7: Connecting the EtherFast
10/100 Bridge. After installing the Bridge hardware, click the OK button.
7. If the 10/100 Bridge is connected to the PC as shown in the diagram (see
Figure 6-9), click the Yes button. Otherwise, click the No or Not Sure button.
14
Figure 6-8
Figure 6-10
Figure 6-9
Figure 6-11