LG 2 - Manual (Page 11)

Using LG EzSign 2.0 Editor
11
NOTE
ꔈ In EzSign 2.0 Editor, you can select a TV to
send content files to.
You can transfer the same or different content
files to all the TVa scanned. After transfer, all
the existing content files saved on the TV are
replaced with the new files.
ꔈ If an error occurs during transfer, a pop-up
message will appear and the previous file is
played.
ꔈ The PC and the TV must be connected to the
same router.
ꔈ The router IP address must be configured to
192.168.XXX.XXX.
ꔈ To check the TV's serial number, select Menu >
Customer Support > Product/Service
Information.
ꔈ If this is the first time Export to TV is used, an
empty TV list will be displayed.
ꔈ If you proceed to another step and return dur-
ing checking transfer availability, checking is
resumed.
ꔈ The TV name will first be displayed as its serial
number. You can change it as desired (up to 16
characters) by clicking the cell.
ꔈ It may take more than a minute to scan
automatically according to the network
environment. If the network is not strong
enough, the TV Auto Scan function may fail to
search all of the TVs connected to the router. If
this happens, retry TV Auto Scan or select Add
+TV to manually input an IP.
ꔈ TVs which already exist in the list are not added
again, even when detected during Auto Scan.
ꔈ To add a TV manually, enter its IP address.
ꔈ Depending on the network or TV condition, the
IP search may fail.
If this happens, check the network environment
and try again.
ꔈ If the Preview function is used for each step,
the Preview window will be displayed for 5 min-
utes and will close automatically.
Notes When Transferring to a TV
ꔈ It may take longer than 5 minutes depending
on the size of content playlist to transfer or the
network environment.
ꔈ Even when transferring to a TV in the list, the
transfer may fail depending on the network or
TV condition. If the transfer fails, check the
error code displayed on the screen and follow
its instructions.
Error code
Error
code Description
Actions
-100 TV busy The TV is performing a
network operation. Try
again later.
If this reoccurs, turn the
TV off and back on.
-200 Network error Check the PC, TV, and
router network connec-
tions.
If this reoccurs, turn the
TV off and back on.
-300 Editor error An error has occurred
during file transfer.
Restart EzSign Editor.
-400 TV error Select
Menu>General>Initial
Setting to reset the
EzSign TV.
-500 PC error An error has occurred
during file editing. Reboot
the PC.
-600 TV error An error has occurred
during file reception.
Restart the EzSign TV.