Lightolier Advent Lytespan 1 and 2 Circuit Track 6101 - Manual (Page 4)

Advent Lytespan ® 1 and 2 Circuit Track
6101
Page 4 of 4
Job Information Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2009 Philips Group • G0309
Lightolier is a Philips group brand
Direct Feed into Connectors
The Live End, "L", "T", "X", In-line, and
Variable Angle Connectors contain a nut with
a 1/2"-14 thread to accept a 3/8" or 1/2" (trade
size) electrical connector, 3/8" connector
recommended. Does not require a separate
power feed kit.
Variable Angle Connector
The Variable Angle Connector is pre-wired
and polarized. It contains a nut with a thread
1/2"-14 to accept a 3/8" (trade sized) electrical
connector. Flexes in all directions.
6153NWH Matte White
6153NBK Matte Black
6153NAL Matte Black
Floating Invisible Feed
Can be mounted anywhere along the track at
a maximum distance of 4' from edge of track
extrusion. Accepts conduit or cable with 3/8" or
1/2" electrical connector (by others). Can be
used with Live End, "L", "T", "X", and In-Line
and Variable Angle connectors. Use Track
Mounting Clips to mount the track.
26082 Zinc Plated
Power Extension Connector
Replaces Dead End Cover at end of track to
permit power continuity around structural
obstacles to another track section.
Accepts same power feed-in kits as Live End.
6146NWH Matte White
6146NBK Matte Black
6146NAL Matte Aluminum
Over Beam or Through Beam
3/8"
Connector
Track
Power Extension
Connector
Beam
Jump
Track
Power Extension
Connector
Wall
Through Wall or Column
Track
Power Extension
Connector
Track
Power Extension
Connector
3/8" Connector
Jump
Wall
(Conduit)
"L" Connector
The "L" connector is polarized and pre-wired.
It may be rotated for right angle or left angle
turn. KO permits direct feed with electrical
connector.
6150NWH Matte White
6150NBK
Matte Black
6150NAL Matte Aluminum
6151NAL Matte Aluminum
6152NAL Matte Aluminum
"X" Connector
The "X" connector is not pre-wired or
polarized. Used to make "X" pattern with
track. 12ga. copper jumper wires supplied to
make all necessary connections. KO permits
direct feed with electrical connector.
6152NWH Matte White
6152NBK Matte Black
3/8"
Electrical
Fitting
(by others)
Clamp Set
Track
Wire Cover
"T" Connector
The "T" connector is not pre-wired or
polarized. Used to make "T" pattern with
track. 12 ga. copper jumper wires supplied to
make all necessary connections. KO permits
direct feed with electrical connector.
6151NWH Matte White
6151NBK
Matte Black
5-1/2"
3-11/32"
5-1/2"
11-3/4"
0-90
Ceiling to Wall
Wall
Inside
Corner
Wall
Outside
Corner
3/8" Connector
(by Others)
Cast Plug
Live End Cover
Track Unit
Locknut 1/2"-12
Live End
1/2"-14 Thread, Integral with
Live End
3/8" or 1/2" Connector, 3/8" recommended
(by Others)
Live End
Track Unit
Track Mounting, Power Feed Systems and Mounting Patterns