Lightolier Advent Lytespan 1 and 2 Circuit Track 6101 - Manual (Page 3)

Advent Lytespan ® 1 and 2 Circuit Track
6101
Page 3 of 4
Job Information Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2009 Philips Group • G0309
Lightolier is a Philips group brand
Stem Mounting Kits
Mounts to a 4" or 3" octagon outlet box. Use
two per 2' and 4' track, three per 8' and 12'
track. When making a run of track do not exceed
4' between stems. Use additional stems for
additional support. Power is fed to the track
with the stem closest to the track feed-in point.
For power feed to Feed T rack and Live End, "L",
"T", "X", In-line, and V ariable Angle Connectors.
Stem can be field cut.
Not recommended for wall mounting.
Stem mounts to track
not feed connecto r .
18" Stem 48" Stem
TRACK MOUNTING AND POWER FEED SYSTEMS
Stem Extension
1/2" O.D. Steel
T ube
1/4-18 NPSM
Thread.
Clamp Set
Stem Extension Kit
Mounts to any stem kit to extend its length
by 48". Cannot be field cut.
7582
7582AL
Matte White
7680 Matte Black
Live End
Energizes T rack from the beginning of a run. It
is included with Individual T rack Units. Use
with plain track units.
6148NWH Matte White
Wiring Diagram
(3) wire two circuit 120/240, 60Hz single
phase with grounded neutral. Maximum load.
2400W (incand.) 20 amp per track circuit,
4800W 40 amps total.
In-Line Connector
Permits power feed between track units in a
straight run of track. The In-Line Connector is
polarized and pre-wired. KO permits direct
feed with electrical connecto r .
6154NWH Matte White
6154NBK Matte Black
Swivel Stem Mounting Kits
Adjusts from 0 to 90. Mounts to a 4" or 3"
octagon outlet box. Use two per 2' and 4' track,
three per 8' and 12' track. When making a run of
track do not exceed 4' between stems. Use
additional stems for additional support. Power is
fed to the track with the stem closest to the
track feed-in point. For power feed to Feed T rack
and Live End, "L", "T", "X", In-line, and V ariable
Angle Connectors. Can be field cut. 48" stem.
Not recommended for wall mounting.
Actual length from
ceiling to top of track: 1 7 3/8" 47 3/8"
Matte White 7584 7586
Matte Black 7683 7681
7681AL
Mini-Coupler
Used to connect two pieces of track together
mechanically and electrically. Power cannot
be fed to the Mini-Coupler. It is included with
Joiner Track Units.
6149NWH Matte White
120V 60Hz single branch circuit, 20 amp
suppl y . Maximum load, 2400W (incand.)
distributed between track circuits.
Switches T rack
240V 120V
Circuit 1
Neutral
Circuit2
B
W
R 120V
Switches T rack
120V
Circuit 1
Neutral
Circuit2
B
W
3" or 4" Octagon
Outlet Box
(by others)
This end may be
field cut.
Stem 1/4"-18
NPSM Thread
Clamp Set
T rack
7480 Matte White
7481 Matte Black
3" or 4" Octagon
Outlet Box
(by others)
0-90 Ceiling
Slope
This end may be
field cut.
Stem 1/4"-18
NPSM Thread
Clamp Set
T rack
Stem mounts to track not feed connecto r .
7584AL Matte Aluminum
7480AL Matte Aluminum
Matte Aluminum
6148 NAL Matte Aluminum
6148NBK Matte Black
6149 NAL Matte Aluminum
6154 NAL Matte Aluminum
6149NBK Matte Black
Track Mounting and Power Feed Systems