LaCie USB 2.0 - Manual (Page 9)

LaCie Mobile Disk
User Manual page 9
Getting Connected
2.1. Connecting the USB 2.0 Cable
Attach the larger end of the USB 2.0 cable to an 1.
available USB 2.0 port on your computer (Fig. 2.1).
Connect the smaller end of the USB 2.0 cable
2.
to the USB 2.0 port on the back of the hard drive
(Fig. 2.1).
After a few seconds, the hard drive will mount on
3.
your computer and appear on the desktop (Mac us-
ers) or in My Computer (Windows users).
Proceed to section
4. 2.3, Launching LaCie Setup As-
sistant .
Fig. 2.1
ImpOrTANT INfO: If your drive does not
power on within a few seconds of connecting the
USB interface cable, proceed to section 2.2, Con-
necting the Optional Power Sharing Cable .