Linksys PVC2300 - Manual (Page 6)

6
Installation
Connect the included Ethernet
network cable to your network
router or switch .
Connect the other end of the cable
to the Camera’s Ethernet port .
If your network switch provides
Power over Ethernet to the Camera,
verify the Camera’s LEDs are lit and
skip steps E-G .
Connect the included power
adapter to the Camera’s Power
port and plug the other end into a
standard electrical outlet .
Verify that the Camera’s LEDs are lit .
C.
D.
E.
LINK/ACT PoE LINK/ACT PoE LINK/ACT Gigabit LINK/ACT Gigabit LINK/ACT PoE LINK/ACT PoE LINK/ACT Gigabit LINK/ACT Gigabit