The front panel – Linksys WET54GS5 User Manual
Page 13
7
Chapter 3: Getting to Know the Wireless-G Ethernet Bridge with 5-Port Switch
The Front Panel
Wireless-G Ethernet Bridge with 5-Port Switch
The Front Panel
The LEDs indicate network activity experienced by the Bridge. (See Figure 3-2.)
Power
Green. The Power LED will light up when the Bridge is powered on. While the Bridge is booting
up and performing a self-test, the Power LED will flash. It will stop flashing and remain lit
when the self-test has ended.
Diag
Green. The Ethernet LED will light up when there is an error wih the Bridge.
Wireless-G LINK Green. The Wireless-G LED will be lit steadily when the Bridge is connected to the wireless
network. The LED will flash when there is wireless network traffic.
Wireless-G ACT
Green. The Wireless-G LED will be lit steadily when the Bridge is connected to the wireless
network. The LED will flash when there is wireless network traffic.
LAN 1-5
Green. The LAN LED will be lit steadily when the Bridge is connected to the wired network. The
LED will flash when there is wired network traffic.
Figure 3-2: Front Panel