LaCie Golden Disk - Manual (Page 13)

LaCie Golden Disk
User Manual
Formatting and Partitioning
Page 13
3.1. Formatting for Windows Users
The process of formatting a drive on a computer
running Windows 2000, Windows XP or Windows
Vista consists of two steps: (1) installing a signature on
the drive, and (2) formatting the drive. These steps will
erase anything that is on the disk.
1. Connect the drive to the computer via the interface
port.
2. Right-click My Computer and select Manage .
3. From the “Computer Management” window, se-
lect Disk Management (located below the Storage
group). See Fig. 3.1.�.
4. If the “Initialize and Convert Disk Wizard” window
appears, click Cancel .
5. Windows will list the Hard Disks that are installed
on the system. Locate the drive that is represented
by the icon. Right-click the icon and select
Initialize .
6. In the box to the right that says Unallocated , right-
click and select New Partition…
7. On the first page of the “New Partition Wizard,”
click Next. See Fig. 3.1.B.
Fig. 3.1.A
Fig. 3.1.B
CAUTION: Following these steps will erase
everything from the Hard Disk. If you have in-
formation that you want to protect or continue to
use, back up this information before performing
these steps.
■ (continued on next page)