Lowrance electronic 3200 - Manual (Page 71)

65
3. Press
→ to
C HOOSE R EFERENCE
| ENT . Use
↑ and ↓ to select a waypoint,
map feature or Point of Interest. When the point has been selected,
press
ENT and the point's position appears as the reference position.
4. Press
↓ to
D ISTANCE
| ENT . Press
↑ or ↓ to change the first character,
then press
→ to the next character and repeat until the distance is cor-
rect. Press ENT .
5. Press
↓ to
B
EARING
| ENT . Press
↑ or ↓ to change the first character,
then press
→ to the next character and repeat until the bearing is cor-
rect. Press ENT .
6. Press
↑ to
P
ROJECTION
| ENT . The Edit Waypoint menu appears. You
can simply save the new projected waypoint by pressing EXIT | EXIT or
you can edit the waypoint. (Press EXIT | ENT if you want to immediately
begin navigating to the new waypoint.)