Daily operation, Adjusting the sound – Loewe 32959022 User Manual

Page 20

- 0

Daily operation

Adjusting the sound

Switching sound off/on

Sound off;
Sound on: Press button again or set volume V+.

Setting the volume

V+/V– volume louder / quieter.

The volume bar will be shown briefly if no other menu
is displayed.

Setting the sound mode

Call Sound mode.

Select the number of speakers you want to hear.

Additional sound settings for volume adjustment and for Sound mode:

➠

As long as you can still see the volume bar or the

selection of speakers for sound mode:

 Call additional sound settings.

34 Select sound setting,
6

Go to the menu line below.

Make changes.

Sound settings via the TV menu

➠

In normal TV mode, without other displays.

Call TV menu.

Select Sound,

6 go to the menu line below.

Select desired sound setting,

6 Go to the menu line below.

Make changes.

Explanations of the sound settings:

Select the number of speakers you want to hear. The

selection depends on the connected sound components

(from page 41) and on the transmitted audio signal.
➠

If the number of speakers appears in brackets, the

sound of missing speakers is transmitted by the existing

speakers (virtual).

The momentarily reproduced audio signal is output with

the ideal number of speakers.

Play centre sound or mono (left/right).

Play front sound (L/R stereo).

Play front and centre sound.

Play front and surround sound.

Play front, surround and centre sound.

Play via an external HiFi amplifier. Selection is only possible

if an amplifier has been selected in the sound components

wizard (see page 46).
➠

You can also enter the number of speakers with the

numeric buttons of the remote control.

Speech, Classical, Pop, Custom music, and Custom film

sound.
Adjust the headphones volume.
Proper boost of bass and treble tones at low volume.
Here you can make Dolby Pro Logic II sound settings for

movie, music, matrix and personal settings. Menu item

only appears with certain sound mode settings.

call with OK.
Selection possibility Mono/Stereo or Sound 1 or Sound

for two-sound broadcasts separately for speakers and

headphones. Only available for analogue stations.
Reduces volume differences, e.g. for advertisements that

are too loud.
Sound selection for two-sound broadcasts.

Determining the maximum volume that can be set.

Specify the volume that is set when switching on the TV

set with the mains switch. This does not affect switching

the set on from standby mode.
The volume can differ according to the individual stations.

If the sound is too loud or too quiet in relation to other

stations, adjust the volume. When the menu is open, you

can select the stations one after another with P+/P– and

adjust every single station conveniently.
Set Stereo-Balance so that the volume impression is identcal
on the left and right.

Sound mode

optimal

1

2

3

4

5

Amplifier



Sound

adjustment

Headphone vol.

Loudness

Dolby PLII

mode

more ...

Loudspeaker/

Headphone

sound

Auto Volume

AV output

signal

Maximum

volume

Switch on

volume

Volume

adjustment for

current station

Balance

END

Sound adjustment

Volume

Sound mode

DPLII mode

Headphone volume

4

Sound mode ...

(5)

optimal

3

2

1