Attaching the speakers, Fig.1 fig.2 fig.3 – Lenoxx Electronics CD-162 User Manual

Page 6

ATTACHING THE SPEAKERS

1.Bring one of the speaker to the right side of

the set.

2. Align the rails of the speaker box with the

main set as shown in FIG.1.

3. When speaker align with the rails, push the

speaker into the rails as shown in FIG. 2.

4. Repeat above steps 1 to 3 for the left

side.

5.Carefully unwind the speaker wire from behind each speaker box and plug the

right plug into Speaker Jack R, also plug the left plug into Speaker Jack L (as

shown in FIG. 3). Wrap the remaining wire behind each speaker box.

FIG.1

FIG.2

FIG.3

NOTE: This set can be used with speaker boxes attached to the cabinet or

separated, just make sure both speaker plugs are plugged into the jacks.

LOCK TAB

To remove the speakers, press the lock tab and push the speakers out

of the rails.

IB-CD162(SLIM)-TA-V1