Lowrance electronic LMS-520C - Manual (Page 49)

39
Mounting the Unit: Bracket, In-Dash or Portable
You can install your unit on the dash with the gimbal bracket. It can
also be installed in the dash or mounted on a portable power supply.
If you use the supplied bracket, you may be interested in the optional
R-A-M
® bracket mounting system. This converts the unit's gimbal
bracket to a swivel mount, which can be used on the dash or overhead
mounting positions.
Optional R-A-M mounting system.
Bracket Installation
Mount the unit in any convenient location, provided there is clearance
behind it when it's tilted for the best viewing angle. You should also make
sure there is enough room behind it to attach the power, transducer and
GPS antenna/receiver module cables.
Holes in the bracket's base allow wood screw or through-bolt mounting.
You may need to place a piece of plywood on the back side of thin fiber-
glass panels to reinforce the panel and secure the mounting hardware.