LifeSpan TR500 - Manual (Page 25)

Press “Enter” and then “Speed Up” buttons until the
console changes to show a number in incline, center
and speed windows. The numbers shown are examples
Press the “Enter” button. The Incline, Center and Speed
windows should change to another set of numbers. The
numbers shown are examples
Press the “Enter” button. The Incline window will
Show “Si” or “En”.
En = English mode
Si = Metric mode
Depending on which mode you would like to use,
pressing the Incline “up” or “down” buttons will allow
you to change between the two modes.
Press the “Enter” button. The Incline window shows
“dis” for total distance the unit has run. The center
and Speed windows show the total miles or kilometers.
Press the “Enter” button. The Incline window shows
“hrs” for the total number of hours the treadmill has
been used. The center and speed window will Show
the total number of hours the treadmill has been used.
Press the “Enter” button. The console goes back into
the set up and run mode.
Incline Center Speed
006 10.11 2.00
Incline Center Speed
110 4910 001
Incline Center Speed
En or Si
Incline Center Speed
Dis 0 000
Incline Center Speed
Hrs 0 000
Incline Center Speed
0 00:00 0
TR1000 – TV Engineering Mode
21