Lumiscope 1095 - Manual (Page 7)

Measurement
• Press the “ON/OFF/START button.
• All display symbols will appear for approximately one
second before the display returns to “0”.
• The unit will automatically start to inflate slowly,
measuring your blood pressure. During inflation, the
changing values of the cuff pressure will be shown on
the display. These numbers are for reference only and
do not represent your final Blood Pressure reading.
• When the pressure reaches your systolic blood pres-
sure, the monitor will exhaust cuff pressure. When the
monitor completes the measurement cycle, it will
automatically display the systolic, diastolic and pulse
readings.
• After the measurement value is displayed, press the
ON/OFF/START button to turn the monitor off.