Lindy 32 342 - Manual (Page 23)

LINDY CPU Switch USB Installation and Use Page 23
3.5 Keyboard hotkey control (model 32 341 only)
The LINDY CPU Switch USB may be conveniently controlled by pressing keyboard
hotkey combinations on the keyboard attached to the PS/2 style keyboard port (see
figure 4). All of the hotkey control commands are invoked by holding down the two
hotkeys and then pressing a command key. By default, the two hotkeys are ‘CTRL’
and ‘ALT’, although other combinations can be selected (see section 2.4.4). Once
the hotkey command has been activated you will need to release the hotkeys and