Lenovo X301 User Manual

Page 82

Table 8. Fn key combinations (continued)

Key combination Description

Fn+F7

Apply a presentation scheme directly, with no need to start
Presentation Director.

To disable this function and use the Fn+F7 key combination for
switching a display output location, start Presentation Director, and
change the settings.
Note:

If the computer is a windows 7 model, it does not support

presentation schemes, but the Fn+F7 combination is available for
switching a display output location.

For Windows 7:
Switch a display output location
v

Computer display only (LCD)

Computer display and external monitor (same image)

Computer display and external monitor (extended desktop)

External monitor only

Note:

To switch between the computer display and an external

monitor, the Win+P key combination is also available.

For Windows Vista and Windows XP:
Switch a display output location
v

External monitor

Computer display (LCD) and external monitor

Computer display (LCD)

Notes:
1.

This function is not supported if different desktop images are
displayed on the computer display and the external monitor (the
Extend desktop function).

This function does not work while a DVD movie or a video clip is
playing.

To enable this function, start Presentation Director, and change the
Fn+F7 settings.
Note:

Multiple users can log on to a single operating system by using

different user IDs. Each user needs to change the settings.

Fn+F8

Change the settings of the UltraNav

pointing device.

Fn+F9

Open the ThinkPad EasyEject Utility screen. Buttons for the following
choices are displayed:
v

Run EasyEject Actions

: This button is used to select, stop, or remove

external devices connected to the ThinkPad computer.

Configure EasyEject Actions

: Opens the ThinkPad EasyEject Utility

main window.

Fn+F9 Settings

: Configures the settings for the Fn+F9 function.

Note:

If the computer is a Windows 7 model, it does not support the

EasyEject Utility function.

Fn+F10

Reserved.

Fn+F11

Reserved.

Fn+F12

Put the computer into hibernation mode. To return to normal operation,
press the power button for less than four seconds.
Note:

To use Fn+F12 for hibernation, you must have the ThinkPad PM

device driver installed on the computer.

ThinkPad X301 Hardware Maintenance Manual