LG LF-D7150 - Manual (Page 7)

7
PREP
ARA
TION
Connections
Make one of the following connections, depending on
the capabilities of your existing equipment.
ips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the unit. Use one of the connections described
below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
– Make sure the unit is connected directly to the TV.
Select the correct AV input on your TV.
– Do not connect your unit to TV via your VCR. The
DVD image could be distorted by the copy protection
system.
Video connection
Connect the MONITOR OUT jack from the unit to the
VIDEO IN jack on the TV using the video cable supplied
(V).
S-Video connection
Connect the S-VIDEO OUT jack on the unit to the S-
VIDEO IN jack on the TV using the S-Video cable (S).
Component Video (Color Stream ® ) connection
Connect the COMPONENT VIDEO (PROGRESSIVE
SCAN) jacks from the unit to the corresponding in jacks
on the TV using an Y Pb Pr cable (C).
Progressive Scan (ColorStream ® pro) connection
If your television is a high-definition or “digital ready”
television, you may take advantage of this unit’s
progressive scan output for higher video resolution.
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the unit.
Connect the COMPONENT VIDEO OUT (PROGRESSIVE
SCAN) jacks from the unit to the corresponding in jacks
on the TV using an optional Y Pb Pr cable (C).
ote
– Set the Progressive to “On” in the Setup menu for
progressive signal, see page 14.
Connecting to a TV
A
U
X
FM
GND
AM
L
R
L
FRONT
(6‰) R
FRONT
(6‰) L
SURR.
(4‰)
CENTER
(4‰) R
SURR.
(4‰)
OPTICAL IN
.
Y Pb Pr
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
L
VIDEO
IN
S-VIDEO
IN
Rear of TV
V S C