LG LF-D7150 - Manual (Page 11)

Before Operation
PREP
ARA
TION
11
Timer Function
With the TIMER function you can have the radio recep-
tion, CD play and USB play turned on and off at the
time desired.
11
Press CLOCK to check the current time.
For your reference
If you don’t set clock, timer function doesn’t work.
22
Press TIMER to enter the timer setting mode.
TUNERtDVD/CD tUSB flash in the display win-
dow in turn.
For your reference
If you want to correct the previous memorized TIMER
setting, press and hold the TIMER button more than 2
seconds.
- The previous memorized timer setting for on Time and
“ ” indicator appears in the display window.
33
Press SET/CD[[ ]] when the desired function
flashes.
44
1. When you select the TUNER function,
Select the previous memorized preset
number with . b
bb b/B BB B > on the front panel
and press SET/CD[].
‘ON TIME’ indicator appears for about 0.5 sec-
onds in the display window and then disappears.
2. When you select DVD/CD or USB function,
‘ON TIME’ indicator appears for about 0.5 sec-
onds in the display window and then disappears.
55
Set the hour to switch on by pressing
.
. b bb b/B BB B > > on the front panel.
66
Press SET/CD[[ ]] to confirm the turn on hour
time.
77
Set the minute to switch on by pressing
.
. b bb b/B BB B > > on the front panel.
88
Press SET/CD[[ ]] to confirm the turn on minutes
time.
‘OFF TIME’ indicator appears for about 0.5 seconds
in the display window and then disappears.
99
Set the hour to switch off by pressing
.
. b bb b/B BB B > > on the front panel.
10
Press SET/CD[[ ]].
11
Set the minute to switch off by pressing . .
b bb b/B BB B > > on the front panel.
12
Press SET/CD[[ ]].
1133
Adjust the volume level by pressing
.
. b bb b/B BB B > > on the front panel.
1144
Press SET/CD[[ ]].
“ ” appears in the display window and the timer
setting has been completed.
1155
Turn the system off.
The selected timer functions are automatically
switched on and off at the preset times.
To cancel or check the timer
Each time the TIMER button is pressed you can
select the timer set or cancel. You can also check the
timer setting status.
To activate or check the timer, press the TIMER button
repeatedly so that “ ” appears in the display window.
To cancel the TIMER, press the TIMER button repeat-
edly so that “ ” disappears from the display window.
Using Microphone
You can sing to a music source by connecting a
microphone to the unit.
11
Connect your microphone to the MIC socket.
“ ” will be shown in the display window.
22
Play the music you want.
33
Sing along with the accompaniment.
Adjust the microphone volume by turning MIC
VOLUME KNOB.
otes
When not using the microphone, set the MIC volume
knob to minimum or turn off the MIC and remove the
microphone from the MIC socket.
If the microphone is set too near the speaker, a
howling sound may be produced. In this case, move
the microphone away from the speaker or decrease
the sound level by using the MIC volume control.
If sound through the microphone is extremely loud, it
may be distorted. In this case, turn the MIC volume
control toward minimum.
To Adjust ECHO Volume
You can give an echo effect to the sound from the
microphones.
Press the ECHO VOL. ( / ) on the Remote Control
to increase the echo volume or decrease it.