Little Wonder Tiller/Cultivator - Manual (Page 16)

16
Now You’re Ready to
Cultivate or Weed.
Guide your Tiller where you
want to weed and start it up.
Pull your Tiller backward
slowly, then let it move forward
a bit, in a gentle rocking
motion. Watch it slice, shred,
and bury those weeds!
Got tough weeds? Lighten
your pressure on the throttle to
slow your Tiller down. Then
work back and forth until your
Tiller chops up the weeds. It’s
easy and effective!
Remember, any tiller will
tangle in tall grass, stringy
vines, or super-big weeds. So, if
you have a “backyard jungle,”
first use a knife, pruner, or
brush cutter to chop up the
overgrowth. If the tines become
tangled anyway, turn the
engine off completely before
trying to clear them.
CULTIVATING
Tilling Position
Tine teeth point in the same
direction as the rotation of the
tine; or toward the front of the
Tiller, away from the operator.
Cultivating Position
Tine teeth point in the
opposite direction as the
rotation of the tine. Tines point
toward the back of the tiller, or
toward the operator.