Lathem PC3500TX - Manual (Page 18)

14 - PC3500TX Terminal Installation & User’s Guide
Enter the router’s numeric IP address followed by the ENTER key.
If you do not use a Router, select No followed by the ENTER key.
After setting the Router option the following message will be displayed:
Enter Sub Net Mask
###. ###. ###. ###
This is the Subnet Mask. (See your network administrator for assignment).
Enter the numeric Subnet Mask address followed by the ENTER key. The following
message will be displayed:
Enter Keepalive Mode
Press the CLEAR key and select Normal and press the ENTER key. The terminal will
display “NETWORK TEST”.
The terminal’s Ethernet communication setup is complete.
To exit the Setup Mode, place the TEST/USE switch to the USE position and press the
CLEAR key. The terminal will goes through its power up sequence. The terminal
displays: “TERMINAL LOCKED”. The terminal can now accept a download.