Land Pride Accuz Z52 - Manual (Page 44)

42
Section 6 Features and Benefits
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M 03/11/03
Land Pride
Section 6 Features and Benefits
Features Benefits
52”, 60” or 72” Cutting width Most popular cutting widths for upper homeowner market and entry into light commercial
market.
Mid-mount deck design Mid-mount design puts the deck closer to the operator’s line of sight for a more efficient
and precise operation.
Compact size 76” in length, is the shortest ZTR on the market. Enhances mowing maneuverability, as
well as fitting on trailers or storing more efficiently.
53” Drive tire stance Narrow width allows for tight turns in corners, yet gives a very stable platform for the
operator.
Steering levers Dual steering levers which control each drive wheel, have a shape and position that is
very user friendly, hand and arm fatigue are greatly minimized.
3/16” Deck w/ 3/8” reinforcement One of the heaviest built decks in the industry for years of rigorous use. Reinforced front
edge where most of the punishment happens.
Floating deck design Deck has a spring assisted chain suspension which offers excellent flotation over uneven
terrain.
Deck height adjustment Height is changed by a spring-loaded foot operated lever and pin. Easy to push and
faster than waiting on an electric actuation.
Anti-scalp rollers Front and four corners to keep scalping to a minimum.
Cutting height 1” to 5” Range in 1/4” increments to cut any type of turf grass.
High blade tip speed 18,700 fpm Assures a good finish cut.
High lift blades Heavy-duty 1/4” high lift blades are thick to handle the wear, with a high lift design to
stand the grass up before cutting.
Mulching kit A mulching kit is available to recycle clippings and discharge them down into the grass.
1” Blade spindles 1” Blades spindles with sealed ball bearings handle heavy shock loads.
Single belt drive Single belt design offers easier maintenance over multiple belt designs, less expensive
to maintain.
Electric clutch control Easy and smooth engagement of the mower blade drive system.
Parking Brake & Safety Lockout Drum brakes and safety lockout are engaged when steering levers are placed in neutral,
does not require a separate operation to place in neutral. One less thing to look for if
mower does not start
Drive Each rear drive wheel has a separate hydrostatic pump & direct drive motor.
Electric start Easily starts with the turn of a key.
Engine hour meter Helps in determining maintenance schedules and trade-in values.
12 gallon fuel capacity Less down time.
Easy engine maintenance Engine is mounted so that all of the maintenance items can be serviced from the rear of
the mower vs. the side.
No daily lube points Blade spindles require grease only once a year. Sealed bearings on front caster wheel
forks.
Molded vinyl seat Molded seat incorporates a high back and armrests to give extra comfort for the long
jobs.
Molded-in cup holders Easy to reach cup holders fit a wide variety of cups, and are in easy access to driver.
Steering lever extensions For extra comfort for the larger person. Add the extensions to give more leg room.
Floating deck design Deck has a spring assisted chain suspension which offers excellent flotation over uneven
terrain.
Deck height adjustment Height is changed by a spring-loaded foot operated lever and pin. Easy to push and
faster than waiting on an electric actuation.