Connections to your tv – LG BD-370 User Manual

Page 13

Connections to Your TV

Make one of the following connections, depending on the capabilities of
your existing equipment.

Tips:
• Depending on your TV and other equipment you wish to connect, there

are various ways you could connect the player. Use only one of the con-
nections described below.

• Please refer to the manuals of your TV, Stereo System or other devices

as necessary to make the best connections.

Cautions:
• Make sure the player is connected directly to the TV. Tune the TV to the

correct video input channel.

• Do not connect the player’s AUDIO OUT jack to the phono in jack

(record player) of your audio system.

• Do not connect your player via your VCR. The image could be distorted

by the copy protection system.

HDMI Connection

If you have a HDMI TV or monitor, you can connect it to this player using a
HDMI cable.

Connect the HDMI jack on the player to the HDMI jack on a HDMI
compatible TV or monitor (H).
Set the TV’s source to HDMI (refer to TV’s Owner’s manual).

Note:

If a connected HDMI device does not accept the audio output of the unit,
the HDMI device’s audio sound may be distorted or may not output.

Tips:

• When you use HDMI connection, you can change the resolution for the

HDMI output. (Refer to “Resolution Setting” on page 17-18.)

• Select the type of video output from the HDMI OUT jack using

[HDMI Color Setting] option on the [Setup] menu (see page 24).

Cautions:

• Changing the resolution when the connection has already been estab-

lished may result in malfunctions. To solve the problem, turn off the play-
er and then turn it on again.

• When the HDMI connection with HDCP is not verified, TV screen is

changed to black screen. In this case, check the the HDMI connection,
or disconnect the HDMI cable.

• If there is noise or lines on the screen, please check the HDMI cable

(length is generally limited to 15ft).

BD player

BD370V-N_BUSALLK-ENG 4/24/09 1:28 PM Page 13