Nstallation – Liebherr HCS 20 User Manual

Page 12

Mounting the refrigerator door panels

- Figures 21 - 28

3. Loosen the three cross-head screws of the

bracket and move the panel to the left until it

makes contact with the center rail

Figure 22.

4. Tighten the three cross-head screws

Figure 22.

Figure 21

Figure 22

NSTALLATION

5. Close the door and check the height of the

panel.

6. Align the panel in its vertical position if

necessary. Loosen the hex nuts and turn the

adusting bolts using a screwdriver for slotted

screws.

Figure 23.

7. Check the vertical position of the panel again

and tighten the hex nuts finally.

Figure 23

Figure 24

To make it possible to fasten the refrigerator

panel at the bottom the soft-stop cylinder must be

dismantled.

8. Stick a small screwdriver under the retaining

clamp and lever out.

Figure 24.

1. Open the left refrigerator door and suspend the

panel on the adjusting bolts

Figure 21.

2. Screw on the hex nuts to the adjusting bolts and

tighten temporarily

Figure 21.