Reference, Controlling – LG RC700N User Manual

Page 48

Controlling

our TV with the

Supplied Multi-brand Remote

Control

You can control the sound level, input source, and
power switch of your LG TV with the supplied
Multi-brand Remote Control.
You can control your TV using the buttons below.

By pressing

You can

POWER

Turn the TV on or off.

AV/INPUT

Switch the TV’s input source
between the TV and other input
sources.

PR/CH +/–

Scans up or down through
memorized channels.

VOL +/–

Adjust the volume of the TV.

Note:

Depending on the unit being connected, you may not be
able to control your TV using some of the buttons.

Controlling other TVs with the
Multi-brand Remote Control

You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is list-
ed in the table below, set the appropriate manufactur-
er code.

1. While holding down TV POWER button, press the

number buttons to select the manufacturer code
for your TV (Refer to table on the right column).

2. Release TV POWER button.

Code numbers of controllable TVs

If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.

Manufacturer

Code Number

LG / GoldStar

1 (Default), 2

Zenith

1, 3, 4

Samsung

6, 7

Sony

8, 9

Hitachi

Notes:

•

Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code.

•

If you enter a new code number, the code number previ-
ously entered will be erased.

•

When you replace the batteries of the remote, the code
number you have set may be reset to the default set-
ting. Set the appropriate code number again.

Reference

TV Control
Buttons