Lenoxx Electronics CD625 - Manual (Page 7)

IB-CD625(CDR92C-0L8)-WM-E-121803
PROGRAMMED PLAY
During programming, the word PROGRAM flashes in the display. To program
songs to play in your preferred order, follow steps below:
1. Press the PROGRAM button once.
The word “PROGRAM” and “ ” will flash
in the display.
2.Press the SKIP/SEARCH button ( or
) to select track number 3 (example).
the “PROGRAM” and “ ” will flash in the
displa y.
Track number
3. Press the PROGRAM button to confirm.
The track 3 is now programmed.
Program #2 will now show in the
display, ready for your next selection of
track.
4. Repeat steps 2 and 3 to program other
tracks till you finish (up to 20 selections).
5. After programming is finished, press
PLAY/PAUSE to begin programmed play.
The word PROGRAM show in the display
and music begins.
6
1
Programming Example
Program Number 1 2 3 4 5 6 7 8
Track Number (song number) 3 5 8 2 4 1 1
etc.
etc.
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Program number
NOTE:
- The player will stop automatically after
all programmed tracks have been
played.
- To quit programmed play, press STOP
button once. Then you may press
PLAY button to re-start normal play.
Your programmed memory will be lost:
• When the alkaline batteries are
exhausted or removed, or the AC
ADAPTOR is disconnected.
• When the power is off, or the CD DOOR
is opened.
PROGRAM
X 1
PROGRAM
X 1
SKIP SEARCH / SKIP SEARCH /
PROGRAM
PROGRAM
PROGRAM
PROGRAM
IB-CD625(CDR92C-0L8)-WM-E-121803.p65 12/23/03, 4:59 PM 7