Lyngdorf Audio Room Perfect TDAI 2200 - Manual (Page 9)

9
So, it was indeed a challenge to create a room correction system that would maintain the
tonality of your system and only compensate for problems that could be solved. And not least,
create a correction system with which everyone could achieve the same huge improvement –
regardless of their level of acoustical knowledge.
Nevertheless, it’s a challenge that has been solved in the Lyngdorf Audio-developed and
patented RoomPerfect
TM system
The solution
In Lyngdorf Audio, we solved the problem with getting 3-dimensional
room knowledge in a very unique way. By combining global
measurements (room positions) with measurement(s) at the listening
position(s) you can actually create 8 different listening positions (if you
want!)
The RoomPerfect TM system is capable of combining the information
about the listening position(s) with the information about the energy
transport into the sound-field in a wholly new and innovative way.
The measurement at the listening position holds information about the
listener’s access to the sound-field while the room positions hold
information about the 3-dimensional sound-field in the entire listening
room.
Thus we can ensure that you achieve perfect sound,
irrespective of your listening room, speaker position and
listening position. In fact, the vast amount of information
gathered about the sound-field allows you to enjoy the
benefits of room correction in any position throughout the
room.
The development efforts involved in creating RoomPerfect
TM
have been enormous, vastly more involved than any
previous implementation of room correction. For the first
time you will see and hear a system with all the required knowledge and operation already
embedded in it.
Amongst other things RoomPerfect™ can - as the only system in the market - derive
information about:
 Room Acoustic properties, modes (peaks and dips in the room)
 Power response throughout the room
 Loudspeaker directivity
 High frequency roll-off
 Characteristics of low frequency roll-off
From the acquired measurements RoomPerfect
TM processes the information and sets up
amplitude targets and limiters for the different filters in an all automated process.
The most challenging task for a room correction system is the automated correction of
an already near ideal system – but RoomPerfect™ is capable of solving even this challenge and
leaving the system with only minor corrections.
RoomPerfect™ automatically identifies the optimal target curve from the information in the
measurements and everything is thereafter controlled by the guided setup in the menu