Hardware setup, 1 front view – Lindy 39401 User Manual
Page 10
LINDY CPU IP Access Switch
User Manual
6
2. Hardware Setup
2.1 Front View
1. Reset / Firmware Upgrade Switch
• Pressing and holding this switch in while powering ON the CPU IP ACCESS SWITCH resets it to the
factory default firmware level
• After the CPU IP ACCESS SWITCH has been powered ON, pressing and holding this switch in for more
that two seconds performs a system reset
Note: This switch is recessed and must be pushed with a thin object – such as the end of a paperclip, or a
ballpoint
pen.
2. 10/100 Mbps Data LED
• The LED lights GREEN to indicate 10 Mbps data transmission speed
• The LED lights ORANGE to indicate 100 Mbps data transmission speed
3. Link LED
Flashes GREEN to indicate that a Client program is accessing the device.
4. Power LED
Lights when the CPU IP ACCESS SWITCH is powered up and ready to operate.
- 32402 (35 pages)
- 25009 (2 pages)
- PRO-300 (28 pages)
- Switch (76 pages)
- Dual Rail Modular KVM Console Switch (20 pages)
- 32514 (71 pages)
- 32321 (12 pages)
- KVM 42339 (3 pages)
- 32927 (16 pages)
- 32595 (4 pages)
- 32416 (8 pages)
- 32361 (69 pages)
- MC5-IP (111 pages)
- 1:04 (2 pages)
- 32451 (2 pages)
- V1.21 (5 pages)
- CPU IP Access Switch Plus (64 pages)
- 39323 (2 pages)
- 42791 (5 pages)
- 32849 (9 pages)
- P16-IP (77 pages)
- 39122 (7 pages)
- 70539 (8 pages)
- 38000 (12 pages)
- 25004 (24 pages)
- KVM EXTENDER 32357 (10 pages)
- 25044 (2 pages)
- GIGAPATCHPANEL 20704 (12 pages)
- 25010 (63 pages)
- 42887 (4 pages)
- Webcam (43 pages)
- 25032 (2 pages)
- 51550 (20 pages)
- 32571 (8 pages)
- 32890 (2 pages)
- 25007 (2 pages)
- 40592 (2 pages)
- 32353 (81 pages)
- CAT5 (6 pages)
- 32591 (12 pages)
- L1TBELRG (51 pages)
- 25008 (18 pages)
- CPU SWITCH (38 pages)
- 32969 (2 pages)
- iSWITCH (52 pages)