Etwork, Etting, 4 network setting – Lumens Technology PS600 User Manual

Page 23

5.4 Network Setting

Step1：Confirm the Ethernet has been connected

Step2：Press

button on the control panel or entry the

OSD Menu by remote control

Step3：Select “Advance”

DHCP：Dynamic Host Configuration Protocol is an Internet

protocol for automating the configuration of computers.

※

Note：Please confirm the DHCP server is available before

use it.

Default is Disable：For static IP address

Please key in the IP, Net Mask, Gate Way value and save

them if you know. Otherwise, please consult the network or
MIS administrator to get help.

Enable：For public IP address

Please restart the Visualizer after the DHCP was enabled. The
IP, Net Mask and Gate Way value can be got automatically by
DHCP.

English - 22