Lenoxx Electronics PH-5562 User Manual
Page 4
IB-PH5562-WM-E-010807
CHECKING THE PACKAGE CONTENTS
As you unpack this set, make sure you have the following items in the package.
3
3. Replace the battery door and snap it shut (FIG. 3).
POWERING THE PHONE
Before you connect the phone cords, follow these steps to install the batteries:
1. Insert a flat blade screwdriver or coin like a quarter into the slot and pry out (lift) the
battery door (FIG. 1).
2. Insert 4 size “AA” alkaline batteries as shown inside the battery compartment (FIG. 2).
HANDSET
TELEPHONE BASE
COILED HANDSET CORD
STRAIGHT TELE-
PHONE LINE CORD
CAUTION
Replace the batteries when the low battery indicator
appears in the display..
• When the batteries are dead, the display will not show. You can still make or receive calls,
but you can’t use the Caller ID or memory dialing.
• When the battery level is low, the speakerphone may not work properly, your data and
settings could also be erased.
FIG. 2
FIG. 3
FIG. 1
WALL MOUNT ADAPTOR (attach
to the back of the base for both
desk use and wall mounting)
IB-PH5562-WM-E-010807.pmd
1/23/2007, 5:08 PM
4