Accessories – Lincoln Electric IM795 User Manual

Page 24

Text mode
Original mode

C-2

ACCESSORIES

MIG (GMAW)
CONVERSION

Several changes are needed to convert the unit for
operation with the MIG (GMAW) process. The follow-
ing conversions should be reviewed before welding
with (GMAW):

1. Change the output polarity to DC(+). See “Work

Cable Installation” in Installation section for details.

2. Install proper drive roll for the wire size selected.

See “Changing Drive Roll” in Maintenance section
for details.

3. Install the proper gun liner and tip for the wire size

selected. See “Component Replacement” in
Maintenance section for details.

4. Remove gasless nozzle (if installed) and install gas

nozzle.

5. Load wire into machine and thread into gun and

cable per “Welding Wire Loading” section.

REPLACEMENT PARTS

Complete Gun and Cable Assembly (Code 10983)

L11951

Complete Gun and Cable Assembly (Code 10982)

L8311-5

SP 170-I