Lowrance electronic Lowrance GlobalMap 7200C - Manual (Page 129)

121
Waypoint Information screens with the Go To Waypoint command se-
lected (left) and the Find on Map command selected (right).
To clear these menus and return to the previous page, press
EXIT
re-
peatedly.
5.
If you're looking by name
, there are two options:
A.
You can
spell out
the
name in the top selection box. Press ↑ or ↓ to change the first letter, then
press → to move the cursor to the next letter and repeat until the name is
correct, then press
ENT
|
ENT
.
B.
Or you can jump down to the lower selec-
tion list by pressing
ENT
, then press ↓ or ↑ to select a waypoint from the
list and press
ENT
. The waypoint information screen appears.
Find By Name menu (left). Waypoint Information screen (center). The
found waypoint (right) is highlighted by the cursor on the Map Page.
A. T
o navigate
to the waypoint, press
ENT
(Go To Waypoint com-
mand is already highlighted.). The unit will show navigation in-
formation to the waypoint.
B. T
o find
the waypoint, press ↓ to
F
IND ON
M
AP
|
ENT
. The Map Page
appears with the cursor centered on the found waypoint.
To clear these menus and return to the previous page, press
EXIT
re-
peatedly.