LifeSource UA-853 - Manual (Page 17)

E-14
LifeSource Health Line (Toll-Free): 1-888-726-9966
USING THE mONITOR WITH AC ADAPTER
The UA-853 has an AC adapter jack to allow you to supply power from an
outlet in your home. We recommend you use only the supplied AC adapter to
avoid potential damage to the monitor.
Connecting the AC adapter to the monitor:
1.
Gently insert the AC adapter plug into a 120V AC outlet.
2. Connect the AC adapter plug into the jack on the back of the monitor.
Disconnecting the AC adapter from the monitor:
1. Turn the unit off by pressing the START button.
2. Disconnect the plug from the jack of the monitor quickly.
3.
Gently remove the AC adapter from the outlet.
NOTE: If monitor has batteries and an AC adapter connected, the measurements
stored in memory will be lost if AC adapter is unplugged from the wall first. To
ensure that measurements remain in memory, make sure the unit is off and
that the jack plugged into the monitor is removed quickly before unplugging
adapter from the wall.
AC Adapter
Plug
Jack