Lumiscope 6700 - Manual (Page 11)

11 . .
With the Optional Rechargeable Battery
One can also use the optional Ni-MH
rechargeable battery for the power input.
It provides approximately 80 minutes of
operation.
To install the battery: Match the device bottom
to the battery top as shown at near right. Slide
until you hear it click into place.
To remove the battery: Push down on the
battery lock as shown at far right and slide the
battery out from beneath the device.
To recharge the battery: Insert the AC/DC
adapter into the device's power socket. An
orange light indicates the battery is being
recharged. The orange light will de-illuminate
when charging is complete. The minimum
recharge time is 5~6 hours.
Note: The first charge of a new rechargeable battery
will require at least 8 hours.
Battery Installation Battery Removal
Battery Recharging
6700-INS-LAB-RevA08.indd 11 1/27/09 4:58 PM