Lumiscope 6700 - Manual (Page 10)

10
METHOD OF POWERING
After the preparation, connect the device to electrical power. The 6700 can be
powered in various ways:
With the AC/DC Adapter
This is designed for use in the home or wherever normal-voltage power supply is
available (different connections are available for different voltages).
1. Ensure that device power is OFF. Ensure that the voltage at the socket is the
same as that of the transformer, as indicated on the transformer specification
plate. Plug the power cord into a properly grounded electrical wall outlet.
2. Insert the transformer plug into the device's power socket.
With the Optional Car Adapter (Cigarette Lighter)
This method allows the patient to take the inhalations when traveling by car.
1. Ensure that the cigarette lighter socket in the car is designed for power of at
least 15 watts. Insert the car adapter plug into the cigarette lighter socket.
2. Insert the car adapter pin into the device's power socket.
WARNING: Never use the device while driving .
Cigarette
lighter
socket
6700-INS-LAB-RevA08.indd 10 1/27/09 4:58 PM