Lowrance electronic EP-60R - Manual (Page 35)

35
Setting Engine-Tank Configuration:
1. Press
MENU
twice, highlight
NMEA 2000
or
N
ETWORKING
and press
ENTER
.
2. The NMEA 2000 menu will appear with five options: Bus Setup,
Fuel Management, NMEA 2000 Alarms, Waypoint Sharing and
Backlight Synchronization. Choose
B
US
S
ETUP
and press
ENTER
.
3. Select
E
NGINE
& T
ANK
C
ONFIG
and press
ENTER
, which will open the
Engine & Tank Configuration menu with the following configuration
options: 1 Engine/1 Tank, 1 Engine/2 Tanks, 2 Engines/1 Tank, 2
Engines/2 Tanks, 3 Engines/1 Tank, 3 Engine/3 Tanks and
Unconfigured Bus.
4. Choose the configuration that matches the number of engines and
tanks on your vessel and press
ENTER
.
5. Highlight
T
ANK
S
ELECT
and press
ENTER
, which will open the Tank
Select menu.
6. Select the tank you want to set up and press
ENTER
. Highlight the
Tank Size dialog box and press
ENTER
.
1 Engine/1Tank highlighted on Engine and Tank Configuration
menu (left). Starboard highlighted on Tank Select menu (center).
Tank Size set to 40 gallons (right).
7. Input the capacity (gallons) of the tank you chose from the Tank
Select menu and press
ENTER
.
8. Repeat Steps 5-7 for each remaining tank.
9. When all tanks have been configured, press the
S
ET
C
ONFIGURATION
button. The following confirmation message will appear: Are you sure
you wish to change the bus configuration? Choose
Y
ES
and press
ENTER
,
Press
EXIT
to return to the main display.
NMEA 2000 Devices List
Devices connected to your NMEA 2000 network will be listed on the
NMEA 2000 Devices list, located at the top of the Bus Configuration