LifeSource UA-789 - Manual (Page 17)

in Canada - auto Control medical (toll-Free): 1-800-461-0991 E-13
This monitor automatically stores up to sixty (60) blood pressure and
pulse measurements in memory. Measurements stored in memory are
assigned an index number in the order of the newest to the oldest.
To retrieve readings, follow these simple steps:
1. When the display screen is showing only the
time, press and quickly release the Memory
("M") button. You will see the date (month
and day) and time of the most recent blood
pressure that was taken followed by the
measurement.
2 .
If you want to retrieve other measurements
in memory, press and release the Memory
button repeatedly until the desired date and
time of the measurement are reached. The
measurement will then be displayed.
3 .
The display will shut off automatically a few
seconds after the readings are displayed.
If there are no measurements stored in memory, you will see dashes
in the date and time fields followed by a measurement of three 0s
displayed vertically.
To clear the measurement history from memory, press and hold the
Memory button for at least five seconds while the display screen is
showing only the time. Release the Memory button when you see
the M symbol in upper left hand corner of the display flash and
disappears. This indicates that the memory has been cleared.
notE: Stored measurements, time, date, and alarm settings will be lost if batteries
become low or are removed for more than 30 seconds.
ABOUT MEMORY
MONTH
DATE
TIME