Lumiscope 1157 - Manual (Page 10)

10
· Your blood pressure will be analyzed according to the World Health
Organization’s standards, and the light up indicator to the right of the display
will display either a red, yellow, green or orange light for both your systolic
and diastolic pressures. Please refer to the chart on page 6 to determine if
your blood pressure may be classifi ed as Low, Normal, Pre-Hypertensive, or
Hypertensive.
3. This reading will be stored in the next available memory in the current User
Memory Zone. Each zone is capable of storing 31 readings.
4. You may scroll through your readings as they are stored sequentially by
pressing the Page> button.
5. After you have measured your blood pressure and the memory is
stored, press the Power button
again to shut off the monitor.
6. If there are no buttons pressed for 60 seconds, the monitor will
automatically turn itself off.
1157-IM-bilingual.indd 10 3/11/05 10:59:41 AM