Lincoln Electric WIRE FEED MODULE IM 513-B User Manual

Page 10

– 10 –

ASSEMBLE INTO CLASSIC SERIES
PIPELINER, SA-250 and 350SA INSTALLA-
TION SEQUENCE:

(For codes 10066, 10914)

1) Remove current range selector and fine current

adjustment control knobs from front of machine.
(small flat screwdriver and 3/32” Allen wrench.)

2) Remove 5 upper nameplate screws, or fastener

buttons.

3) Break-off upper half of machine nameplate.

Nameplate is scored for easy bending and break-
off.

4) Install control panel assembly. (Wiring connec-

tions will be made later).

5) Secure control panel assembly with (7) screws

from the mounting hardware packet.(5/16” Nut
Driver)

6) Reinstall current range selector and fine current

adjustment control knobs to front of machine.
(Small flat screwdriver and 3/32” Allen wrench).

7) (For Classic II models ONLY) Remove the side

panel. (3/8” Socket wrench).