Lindy 70584 User Manual
Page 2
PAGE 2
u
Description
The 70584 32Bit PCI bus Plug & Play 1S I/O card is equipped with one
High-Speed RS-232.V24 Standard Serial Interface. The serial port includes 32
Byte FIFO with a speed up to 921Kb/Sec. 70584 includes one 9 pin male
connector for attaching the peripheral’s unit.
u
Hardware Specification
Serial Port:
UART Chipset: SUN1889, Hardware FIFO are 32Byte FIFO
Compatible chips: with 16C650, 16C550 and 16C450.
IEEE standard: RS-232 Interface
Driver Chipset: TI-75232, speed up to 100Kb/Sec, length 300-500M.
Max. Speed: Up to 921Kb/Sec (HYPER Terminal program)
!
u
Hardware Installation
½
Turn off the power of your computer
½
Plug the 70584 Serial Adapter to the PCI bus of your computer
½
Connect the peripheral (Printer, Modem, Scanner… etc.) to this adapter
½
Turn on the power of your computer
PCI device listing display (for example…)
Bus No Device No Func No Vendor ID Device ID
Device Class
IRQ
0 7 1 8086
7010
IDE
Controller
14
0 13 0 1409
7168
Simple
COMM.
Controller
10
When Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an error
occurs, please change the PCI slot.
After correct hardware installation you can start installing the software from the
driver CD.