Lanier LW 210 - Manual (Page 22)

COPYING ONTO ROLL PAPER
You can copy onto roll paper in the following three ways:
synchro cutting, preset cutting, and variable cutting.
S
If roll paper is damp, cut it in about 1,000 mm, 39.4" immediately before
copying.
☞
See page 41, "Cutting the Paper Automatically/Manually"
Synchro Cutting
This function cuts roll paper automatically according to the original length.
S
The synchro cut can handle the cut length from 245 to 3,600 mm, 9.6" to
142".
S
When copying on to A1, 24
×
36"
K
transparencies, you can make up to 20
copies continuously. When you have made 20 copies, wait for 15 minutes
until you resume copying.
S
When you copy an A2, 18"
×
24" or larger original after making 30 copies
continuously from an A3, 12"
×
18" or smaller original, wait for 10 minutes
or more until you start copying the larger original.
1
Press the Cut Select key to turn
on the "Synchro Cut" indicator.
2
Set the original guide to match the
original width and direction.
14 COPYING