Lucent Technologies IP Touch WLAN Handset 610 - Manual (Page 22)

Programming your telephone
22
6
• Locking the keypad:
• Lock the keypad automatically:
you can configure your set so that the keypad is blocked automatically after 5, 10 or 20 seconds.
• Unlocking the keypad:
6.12 Configure the set according to the background noise (Noise mode)
This function is used to configure the set to obtain optimal listening conditions depending on the background noise.
• Normal: corresponds to most office environments.
• High: corresponds to an average level of background noise.
• Severe: corresponds to an extremely high level of background noise.
select the time
period before
the automatic
locking
OK OK Lock Keys Ok
OK OK Keypad autolock
Ok
OK
#
select the
ambient
volume level
OK OK Phone Settings OK OK Noise mode OK OK
6.13 Activate/deactivate the Key tones
By default the set emits a tone each time a key is pressed.
To deactivate these tones:
6.14 Activate/deactivate the Warning tones
The warning tones inform the user of an abnormal operation (out of range, system activated or halted, etc.).
To deactivate these tones:
OK OK Phone Settings OK OK Key Tones OK
Enable Tones OR Desable Tones OK
OK OK Phone Settings OK OK Warning Tones OK
Enable Tones OR Desable Tones OK