Lenoxx Electronics PH-417 - Manual (Page 10)

IB-PH417-WM-E-022804
The set can be mounted on a wall phone plate. If you do not have a modular wall phone
plate installed, we recommend that you consult with your telephone company or installer to
get one, or turn to page 10 for instruction.
1. Reversible HANDSET HOLDER - When the telephone is mounted on the wall, the
REVERSIBLE HANDSET HOLDER must be adjusted so it will hold the handset.
1.SLIDE OUT 2.REVERSE 3.REPLACE INTO PHONE
CONNECTING TO WALL PLATE
1. Use the SHORT STRAIGHT cord.
2. Plug one end into the PHONE LINE jack
(on the rear of the set).
3. Plug the other end into the wall jack.
4. Route the cord into the channel as
shown.
WALL MOUNTING
9
5. Put the phone over wall plate, make
sure both posts fit into slots on the back
of the phone. Then push down to lock
phone onto the wall plate.
IB-PH417(MS)-WM-E-022804.p65 2/27/2004, 12:28 PM 10