Lucent Technologies 6000 - Manual (Page 569)

Index
C
MAX 6000/3000 Network Configuration Guide Index-3
bridging
AppleTalk , 13-2
ARP broadcasts , 14-3
Bridge Adrs profile , 14-5
broadcast addresses , 14-2
defined , 14-1
disadvantages of , 14-2
enabling (Bridging parameter) , 14-3
establishing , 14-3
IPX , 14-12
IPX client bridge , 14-14
IPX server bridge , 14-15
learning , 14-4
name, setting , 14-3
promiscuous mode , 14-3
proxy mode, configuring , 14-16
table, managing , 14-4
table, physical (MAC) address , 14-2
transparent , 14-4
bridging connections
Answer profile , 14-5
attributes for , 14-8
Connection profile , 14-5
Names/Passwords profile , 14-5
Bridging parameter , 14-3
bridging table , 4-19
BRI/LT
configuring , 3-43 , 3-45
diagnostics , 3-45
broadcast addresses , 14-2
broadcast traffic
reducing , 13-1
Buffer Chars parameter , 4-85
bundle ownership , 4-57
C
Call command , 6-19
call filters, applying , 15-2 , 15-28
call management
Combinet encapsulation, accepting/rejecting , 4-5 , 4-9
incoming/outgoing calls, enabling/disabling , 4-38
switch calls, duration maximum , 3-50
Call profile
data service specification , 4-39
call profile
defined , 3-12
call routing
dial out number , 3-53 , 6-3
Call Type parameter , 5-5 , 6-3 , 6-6
callback security , 2-4
Call-by-Call parameter , 4-40 , 5-6 , 6-3
Caller-ID authentication , 2-5
calls
Call command , 6-19
Clr command , 6-20
destination channel group, specifying , 3-77
determining answer to , 3-49
dial out telephone number , 4-18
DTE-initiated , 6-33
Facilities command , 6-20
FT1-B&O , 3-56
Full command , 6-20
Half command , 6-20
Host-initiated , 6-33
incoming, configuring channels , 3-77
incoming, setting parameters for , 3-77
Listen command , 6-20
MP/MP+, spanning , 4-57
number of channels, specifying , 3-50
origin of port, specifying , 3-49
outbound, configuring channels , 3-76
outgoing, setting parameters for , 3-76
Reset command , 6-21
routing flowchart , 3-75
routing, inbound , 3-59 , 3-66 , 4-116
routing, outbound , 3-69
single-channel, configuring , 3-57
Status command , 6-21
two-channel dual-port , 3-58
Carrier Detect (CD) signal , 3-50
CBCP (Callback Control Protocol)
defined , 4-7
LCP , 4-7
parameter , 4-22
Cell First parameter , 4-84
Cell Level parameter , 4-84
Ch N parameters (E1) , 3-25
Ch N parameters (T1) , 3-11 , 3-24 , 3-77
channel
group , 3-76
mapping , 3-78
real , 4-58
single call, configuring , 3-57
stacked , 4-58
CHAP (Challenge Handshake Authentication Protocol) ,
2-4 , 4-2
authentication , 4-45 , 4-78 , 4-79
bidirectional , 4-64
CIDR (Classless Inter-Domain Routing) , 8-3
circuits
NNI-NNI , 5-28
UNI-NNI , 5-30
UNI-UNI , 5-26
Clear Call parameter , 4-85
client DNS, RADIUS attributes , 9-15