Linksys BEFN2PS4 User Manual

Page 27

Instant Broadband

Series

Follow these instructions to install the TCP/IP Protocol on one of your PCs
only after a network card has been successfully installed inside the PC. These
instructions are for Windows 95 and Windows 98. For TCP/IP setup under
Microsoft Windows NT, please refer to your Microsoft Windows NT manual.

1. Click the Start button. Choose Settings, then Control Panel.

2. Double-click the Network icon. Your Network window should pop up.

Select the Configuration tab.

3. Click the Add button.

4. Double-click Protocol.

5. Highlight Microsoft under the list of manufactures.

Installing the TCP/IP Protocol

EtherFast

Cable/DSL & Voice Router powered by Net2Phone

6. Find and double-click TCP/IP in the list to the right (below).

7. After a few seconds you will be brought back to the main Network win-

dow. The TCP/IP Protocol should now be listed.

8. Click OK. Windows may ask for original Windows installation files.

Supply them as needed (i.e.: D:\win98, D:\win95,
c:\windows\options\cabs.)

9. Windows will ask you to restart the PC. Click Yes.

The TCP/IP Installation is complete.

Twisted-Pair Cabling